2-4. Using other driving systems
Conditions that may trigger the system even if there is no possibility of a collision
■
When there is an object by the roadside at the entrance to a curve
●
When passing an oncoming vehicle on a curve
●
When driving over a narrow iron bridge
●
When there is a metal object on the road surface
●
When driving on an uneven road surface (nose up, nose down)
●
When passing an oncoming vehicle on a left-turn
●
When your vehicle rapidly closes on the vehicle in front
●
When a grade separation/interchange, sign, billboard, or other structure
●
appears to be directly in the vehicle' s line of travel
When the steep angle of the road causes a metal object located beneath the
●
road surface to be seen ahead of the vehicle
When an extreme change in vehicle height occurs
●
When the axis of the radar is out of adjustment
●
When passing through certain toll gates
●
When passing through an overpass
●
When the system is activated in the situations described above, there is also a possi-
bility that the seat belts will retract quickly and the brakes will be applied with a force
greater than normal. When the seat belt is locked in the retracted position, stop the
vehicle in a safe place, release the seat belt and refasten it.
Obstacles not detected
■
The sensor cannot detect plastic obstacles such as traffic cones. There may also be
occasions when the sensor cannot detect pedestrians, animals, bicycles, motorcy-
cles, trees, or snowdrifts.
When there is a malfunction in the system
■
Warning lights and/or warning messages will turn on or flash. (P. 596, 609)
270
CT200h_U (OM76040U)