Lexus CT200h Owner's Manual page 187

Reverse warning buzzer
■
When shifting into R, a buzzer will sound to inform the driver that the shift position is
in R.
About engine braking
■
When shift position B is selected, releasing the accelerator pedal will apply engine
braking.
• When the vehicle is driven at high speeds, compared to ordinary gasoline-
fueled vehicles, the engine braking deceleration is felt less than that of other
vehicles.
• The vehicle can be accelerated even when shift position B is selected.
If the vehicle is driven continuously in the B position, fuel efficiency will become low.
Usually, select the D position.
Automatically P position selection function
■
When the "POWER" switch is in ON mode while the shift position is in a position
other than P and the vehicle is stopped completely, pressing the "POWER" switch
will cause the automatically P position selection function to operate together with
the "POWER" switch being turned to off.
If the shift position cannot be shifted from P
■
There is a possibility that the 12-volt battery is discharged. Check the 12-volt battery
in this situation. (P. 651)
Sport mode automatic deactivation
■
Sport mode is automatically deactivated if the "POWER" switch is turned off after
driving in sport mode.
After recharging/reconnecting the 12-volt battery
■
P. 531
Customization
■
Settings (e.g. Reverse warning buzzer) can be changed.
(Customizable features P. 701)
CT200h_U (OM76040U)
2-1. Driving procedures
187
2