Lexus CT200h Owner's Manual page 468

3-7. Other interior features
STEP 3
Repeat the steps above to program another device for any of the
STEP 4
remaining HomeLink
468
CT200h_U (OM76040U)
Test the HomeLink
pressing the newly programmed
button.
If a HomeLink
programmed for a garage door,
check to see if the garage door
opens and closes. If the garage
door does not operate, see if your
garage transmitter is of the rolling
code type. Press and hold the pro-
grammed HomeLink
remote control transmitter is of the
rolling code type if the HomeLink
indicator light flashes rapidly for 2
seconds and then remains lit. If
your transmitter is the rolling code
type, proceed to the heading "Pro-
gramming a rolling code system".
®
buttons.
®
operation by
®
button has been
®
button. The
®