Connecting To An Ecr - VeriFone VX805 CTLS Installation Manual

Connecting to an Connect the VX805 CTLS to an ECR using one of the following connections:
ECR
•
•
Connecting to an ECR Using PoweredUSB
The VX805 CTLS connects to an ECR by using a direct PoweredUSB connector
(VPN - CBL282-033-xx-A). Connect the PoweredUSB cable to the VX805 CTLS
(see
USB host port on the ECR.
Figure 12
NOTE
In an ECR connection environment, the ECR would need to provide sufficent
power (2.5W) to the VX805 CTLS.
Connecting to an ECR Using Serial Power Cable
The VX805 CTLS connects to an ECR by using a serial power cable (VPN -
CBL282-031-xx-A). Connect the serial power cable to the VX805 CTLS (see
Cable
When connecting an ECR by using a serial power cable, you need to also
NOTE
connect the serial connection to an external power source. For further
instructions, see
Figure 13
Connecting to an ECR Using PoweredUSB
Connecting to an ECR Using Serial Power Cable
Cable Connections) and plug the male USB connector into the corresponding
Connecting to an ECR Using PoweredUSB
Connections), then connect the DB-9 connector housing to the ECR.
Connecting to External Power Using Serial Power
Connecting to an ECR Using Serial Power Cable
External Device Connections
Cable.
VX 805 CTLS I
NSTALLATION
S
ETUP
19
G
UIDE