Wall-Mount The Switch Horizontally With The Back Panel Facing Up - NETGEAR GC510P Hardware Installation Manual

Insight Managed 8-Port Gigabit Ethernet PoE+ Smart Cloud Switch with 2 SFP Fiber Ports
Leave about 6 mm (¼ inch) of each screw protruded from the wall so that you can insert the screws
into the holes on the bottom of the switch.
5. Line up the holes on the bottom panel of the switch with the screws in the wall and mount the switch to
the wall.

Wall-Mount the Switch Horizontally With the Back Panel Facing Up

To mount the switch horizontally to a wall with the back panel facing up (that is, with the
cables at the top):
1. Locate the four holes in the bottom panel of the switch.
2. Mark the four mounting holes on the wall where you want to mount the switch.
Installation
27