Leds - NETGEAR GC510P Hardware Installation Manual

Insight Managed 8-Port Gigabit Ethernet PoE+ Smart Cloud Switch with 2 SFP Fiber Ports
Table 1. Back panel components
Number Description
1a Cloud Connection LED (see
1b Power LED (see
1c PoE Max or Fault LED (see
1d Fan LED (see
2 Recessed multi-function Reset button (see
3 Eight independent 10/100/1000BASE-T RJ-45 PoE+ ports, each with a left LED that functions as the
combined speed and activity LED and a right LED that indicates the PoE status (see
13).
4 Two dedicated Gigabit SFP fiber ports that can accept optional transceiver modules (see
for Fiber Connectivity
LED (see
5 AC power receptacle.
6 Kensington lock for an optional security cable.

LEDs

This section describes the LED designations of the switch.
Table 2. LEDs on the back panel
LED
Cloud Connection LED
Power LED
PoE Max/Fault LED
Fan LED
Model GC510PP only
LEDs on page 13).
LEDs on page 13).
LEDs on page 13).
LEDs on page 13) for model GC510PP only.
on page 15) with a single LED that functions as the combined link and activity
LEDs on page 13).
Description
Solid blue. The switch is connected to the cloud server and is set up to be managed by
the NETGEAR Insight app.
Off. The switch is not connected to the cloud server or is set up to be managed by the
local browser interface.
Solid green. The switch is powered on.
Solid amber. The switch is booting.
Off. Power is not supplied to the switch.
Off. Sufficient (more than 7W of) PoE power is available.
Solid amber. Less than 7W of PoE power is available.
Blinking amber. At least once during the previous two minutes, less than 7W of PoE
power was available.
Solid green. The fan is operating normally.
Solid amber. A problem occurred with the fan.
Hardware Overview
Multi-Function Reset Button
13
on page 15).
LEDs on page
SFP Ports