Measure Mode; Autostart For Recording Cycling Exercise; Exercise Recording Mode - Polar Electro S510 User Manual

Autostart for Recording a Cycling Exercise
If you start from the Time of Day display, press OK briefly to enter the
Measure mode. Your exercise recording automatically starts/ pauses as you
start/ stop cycling.
If you want to record cycling information only, start cycling after the heart
rate reading 00 appears on the display. If you want to record both cycling
and heart rate information keep the bike still until your heart rate appears
on the display.

Exercise Recording Mode

If you are starting from Time of Day display, press and hold OK.
Exercise information will be stored in an exercise file only when the
stopwatch is running. The ongoing recording is indicated with a graphic
bar that runs continuously on the display.
If your preset exercise requires cycling settings, Set bike is displayed
for a few seconds. In order to start the exercise set you need to select bike
1 or 2 by pressing and holding the down button until the desired set is
displayed. The choice is displayed in the lower right corner:
b0= bike off
b1= bike 1 settings on
b2= bike 2 settings on
C 46