Service Dialog
Available on both user interfaces.
NOTE
This dialog interface displays the values on the screen only. The analog signal will not be
affected. Some of the signals can be routed to the analog output selectable in the VWD -
Settings - Analog screen.
On the Control Module it can be accessed from System - Tests - VWD. Then press the
m- (menu) key and select Service.
Selection list of
signal 1 and 2
Figure 16
Table 8 Diagnostic Signals
1100 Series Variable Wavelength Detector Reference Manual 75
Position of grating
Position of filter
drive
drive
Service Dialog
Troubleshooting and Test Functions
Actual values of
signal 1 and 2
Actual gain setting Actual gain setting
for sample
for reference
3
Position grating on
zero-order line