Agilent Technologies 1100 Series Reference Manual page 211

Setup View
In the Setup view, e.g. another module can be added to the view.
Here, e.g. the diode array detector parameters are shown on the display as well. The
number of parameters on the display are restricted as additional modules are added.
Maximum 4 modules are shown automatically. If more modules are in the system, you
have to chose in Setup view.
With the Settings key you open a pull-down menu where you can select the VWD
modules.
Settings
Within the Settings you can change the VWD parameters and with a different set of
parameters available through the F1-5 keys. F7 key resets the VWD to default values.
F8 opens a window to turn on the lamp.
1100 Series Variable Wavelength Detector Reference Manual 209
Control Module Screens for the Agilent 1100 Variable Wavelength Detector
7