Resetting The Stopwatch; Stopping The Heart Rate Measurement; Functions During The Interval Training Mode; Starting The Interval Training Session - Polar Electro Polar COACH Quick Reference Manual

To be able to start the Recovery calculation you need to set the recovery
values and turn either RECO Hr or RECO TI on first.
Setting the Recovery function.

RESETTING THE STOPWATCH

First press SET/START/STOP to stop the stopwatch. Then press and hold
SET/START/STOP until all the stopwatch digits are back to zero. Release
the button. The current file is deleted and you can start the stopwatch and
record again.

STOPPING THE HEART RATE MEASUREMENT

Choose from the following two alternatives to continue:
1. To stop the heart rate measurement and enter the Time of day display:
Press SET/START/STOP to stop the stopwatch.
Press SELECT 3 times. You are now in the Time of day display and
you can recall the recorded information later.
2. To stop the heart rate measurement and continue directly on to recalling
the recorded training information.
information.
30
Recalling the training
FUNCTIONS DURING THE
INTERVAL TRAINING MODE
An interval training session consists of warm up, interval training, and cool
down phases. Heart rate limits swap automatically between the different
phases as follows:
LIM1 in use
Warm up Intervals
LIM 1
LIM1 and 2 in use
Warm up Intervals
LIM 1
LIM1, 2 and 3 in use
Warm up Intervals
LIM 1
For further information and examples of interval training sessions
Interval training.

STARTING THE INTERVAL TRAINING SESSION

Structure of an interval exercise session:
Stopwatch is running Press SELECT
Warm up
The following instructions are for basic interval training
(Int is ON, countdown timer and recovery calculation
are in use).
1. Start the interval training mode as instructed in
Start the heart rate measurement.
Cool down
LIM 1 LIM 1
Cool down
LIM 2 LIM 1
Cool down
LIM 2 LIM 3
Returns automatically
Intervals Cool down
31