Figure 3-11. Unlocking the SFP module latch - wire variety
3. With the SFP module latch in the unlocked position, remove the SFP module.
v For SFP modules that contain plastic tabs, slide the SFP module out of the port.
v For SFP modules that contain wire tabs, grasp the wire latch and pull the SFP module out of the
port.
4. Replace the protective cap on the SFP module.
5. Place the SFP module into a static-protective package.
6. Replace the protective cap on the host port.
Using LC-LC Fibre Channel cables
The LC-LC Fibre Channel cable is a fiber optic cable that you use to connect Fibre Channel ports to one
of the following devices:
v An SFP module installed in a Fibre Channel switch port
v A Fibre Channel host bus adapter port (optical interface connector)
See Figure 3-12 for an illustration of the LC-LC Fibre Channel cable.
For more information, see the documentation that comes with the LC-LC Fibre Channel cable.
Figure 3-12. LC-LC Fibre Channel cable
Connecting an LC-LC cable to an SFP module:
To connect an LC-LC Fibre Channel cable to an SFP module, complete the following steps.
Wire
tab
Protective
cap
90
Chapter 3. Cabling the storage subsystem and storage enclosure
SFP
module
3-9