Esm Numeric Display Diagnostic Codes - IBM DS3500 Installation, User's, And Maintenance Manual

Table 4-2. Controller numeric display diagnostic codes (continued)
Value
L3
L4
L5
L6
L7
L8
L9
LA
LB
LC
LD
LE
LF
LH
Table 4-3. ESM numeric display diagnostic codes
Value
FF
88
AA
bb
L0
L2
L3
L9
LL
LP
Ln
H2
LF
LH
H3
H4
H5
H6
H9
J0
Description
Persistent hardware errors.
Persistent data protection errors.
ACS failure.
Unsupported host card.
Submodel identifier not set or mismatched.
Memory configuration error.
Link speed mismatch.
Reserved.
Host card configuration error.
Persistent cache backup configuration error.
Mixed cache memory DIMMs.
Uncertified cache memory DIMM sizes.
Lockdown with limited SYMbol support.
Controller firmware mismatch.
Description
ESM Boot Diagnostic executing.
This ESM is being held in Reset by the other ESM.
ESM-A application is booting up.
ESM-B application is booting up.
Mismatched ESM types.
Persistent memory errors.
Persistent hardware errors.
Over Temperature.
Cannot read midplane EEPROMs.
Missing Drive Port Mapping table.
ESM not valid for enclosure.
Invalid/Incomplete Configuration.
Lockdown with limited SYMbol support.
Controller firmware mismatch.
Maximum Reboot Attempts Exceeded.
Cannot Communicate with Other ESM.
Midplane Harness Failure.
Firmware Failure.
Non-Catastrophic HW. ESM operational, but in a degraded mode.
Incompatible module.
Chapter 4. Operating the storage subsystem and storage enclosure
4-13