Overview; Applicable Devices And Support Software; Applicable Devices - Omron NJ501 Connection Manual

4. Overview

This document describes the procedure for connecting the OMRON Safety Network Controller
(NE1A series) to the OMRON NJ-series Machine Automation Controller (hereinafter referred
to as the Controller) on DeviceNet and provides the procedure for checking their connection.
This document does not describe the safety functions. Refer to the DeviceNet Safety Safety
Network Controller Operation Manual (Cat. No. Z906) for information on the safety functions
and ensure the safety.

5. Applicable Devices and Support Software

5.1. Applicable Devices

The applicable devices are as follows:
Manufacturer
OMRON NJ-series CPU Unit
OMRON DeviceNet Unit (Master Unit)
OMRON Safety Network Controller
Precautions for Correct Use
As applicable devices above, the devices with the models and versions listed in Section 5.2.
are actually used in this document to describe the procedure for connecting devices and
checking the connection.
You cannot use devices with versions lower than the versions listed in Section 5.2.
To use the above devices with versions not listed in Section 5.2 or versions higher than those
listed in Section 5.2, check the differences in the specifications by referring to the manuals
before operating the devices.
Additional Information
This document describes the procedure to establish the network connection. Except for the
connection procedure, it does not provide information on operation, installation or wiring
method. It also does not describe the function or operation of the devices. Refer to the
manuals or contact your OMRON representative.
Name
NJ501-[][][][]
NJ301-[][][][]
CJ1W-DRM21
NE1A-SCPU01-V1
4．Overview
Model
3