4
The new project is displayed.
The left pane is called Multiview
Explorer, the right pane is called
Toolbox and the middle pane is
called Edit Pane.
5
Double-click CPU/Expansion
Racks under Configurations
and Setup in the Multiview
Explorer.
The CPU/Expansion Racks Tab
is displayed on the Edit Pane.
6
Select Communications under
Category in the Toolbox.
Select CJ1W-DRM21.
Right-click CJ1W-DRM21.
Select Insert from the menu that
is displayed.
CJ1W-DRM21 Unit is displayed
as shown in the figure on the
right.
7
Enter 0 in the Unit No. Field.
7.Connection Procedure
Multiview
Edit Pane
Explorer
Toolbox
14