Configure Group Policy Information - Cisco 1941W Configuration Manual

Configuring VPN
Command or Action
Step 6
lifetime seconds
Example:
Router(config-isakmp)# lifetime 480
Router(config-isakmp)#
Step 7 exit
Example:
Router(config-isakmp)# exit
Router(config)#
1. ISAKMP = Internet Security Association Key and Management Protocol
2. DES = data encryption standard
3. MD5 = Message Digest 5
4. SHA-1 = Secure Hash standard
5. SA = security association

Configure Group Policy Information

To configure the group policy, follow these steps, beginning in global configuration mode.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command or Action
Step 1 crypto isakmp client configuration group
{group-name | default}
Example:
Router(config)# crypto isakmp client
configuration group rtr-remote
Router(config-isakmp-group)#
Step 2 key name
Example:
Router(config-isakmp-group)# key
secret-password
Router(config-isakmp-group)#
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
136
crypto isakmp client configuration group {group-name | default}
key name
dns primary-server
domain name
exit
ip local pool {default | poolname} [low-ip-address [high-ip-address]]
Chapter Configuring Security Features
Purpose
Specifies the lifetime, from 60 to 86400 seconds,
5
for an IKE SA .
Exits IKE policy configuration mode and enters
global configuration mode.
Purpose
Creates an IKE policy group containing attributes
to be downloaded to the remote client.
Also enters the ISAKMP group policy
configuration mode.
Specifies the IKE pre-shared key for the group
policy.