Ap Bridge - Point To Multipoint Mode - Planet WMRT-414 User Manual

6.3

AP Bridge - Point to Multipoint Mode

This function allows WMRT-414 to bridge more than 2 wired Ethernet networks together by
wireless connection.
Parameter Description
Mode Shows the current operation mode. You may set WMRT-414 to other operating
mode by select other operating mode.
Band 2.4GHz (B): It allows to select the transmit rate up to 11Mbps.
2.4GHz (G): It allows to select the transmit rate up to 54Mbps.
2.4GHz (B+G): It allows selecting the 802.11b and 802.11g data rates.
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
MAC Address 1-4 If you want to bridge multiple WMRT-414 in this mode, you have to enter the MAC
addresses of other WMRT-414 into the fields.
Set Security IF you want to enable security to protect your wireless connection. Please press
"Set Security" button and refer to section 6.5 "Security setting for bridge mode" to
configure the detail settings.
After configuration complete, please click "Apply" button to save the configuration. Then you will see
a screen to prompt you the settings are save successfully. You may press "Continue" for configure
- 62 -