Qos - Planet WMRT-414 User Manual

5.5

QoS

Quality of Service (QoS) refers to the capability of providing better service to selected network traffic. The
primary goal of QoS is to provide priority including dedicated bandwidth, controlled jitter and latency
(required by some real-time and interactive traffic), and improved loss characteristics. When using this
feature, it is important to make sure the rules are not conflicted with each other.
Parameters Description
Add When you want to add a new QoS rule, press this button and refer to section
5.5.1 to add a new QoS rule.
Edit When you want to edit the existing QoS rule, press this button and refer to
section 5.5.1 to edit QoS rule.
Delete Selected Select the QoS rule which you would like to delete , then press this button to
delete.
Delete All When you want to delete all the QoS rules, you just need to press this
button.
Move Up Select a QoS rule and press this button to assign higher priority.
Remove Down Select a QoS rule and press this button to assign lower priority.
Reset Click "Reset" to clear your current selections.
After configuration complete, please click "Apply" button to save the configuration. Then you will see a
screen to prompt you the settings are save successfully. You may press "Continue" for configure other
settings or "Apply" to restart WMRT-414 with new configuration.
- 42 -