Ap Bridge - Point To Point Mode - Planet WMRT-414 User Manual

802.11g wireless mimo broadband router
Table of Contents

Advertisement

6.2

AP Bridge - Point to Point Mode

This function allows WMRT-414 to bridge 2 wired Ethernet networks wirelessly.
Parameter
Description
Mode
Shows the current operation mode. You may set WMRT-414 to other operating
mode by select other operating mode.
2.4GHz (B): It allows to select the transmit rate up to 11Mbps.
Band
2.4GHz (G): It allows to select the transmit rate up to 54Mbps.
2.4GHz (B+G): It allows selecting the 802.11b and 802.11g data rates.
Channel Number
Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
MAC Address 1
Please enter the MAC Address of another WMRT-414 that this one will connect.
Set Security
IF you want to enable security to protect your wireless connection. Please press
"Set Security" button and refer to section 6.5 "Security setting for bridge mode" to
configure the detail settings.
After configuration complete, please click "Apply" button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press "Continue" for
configure other settings or "Apply" to restart WMRT-414 with new configuration.
- 61 -

Advertisement

Table of Contents
loading

Table of Contents