Table of Contents
Advertisement
5.3
LAN
The LAN Port screen below allows you to specify a private IP address for your router's LAN interface.
Parameters
Description
LAN IP
IP Address
Designate the Access Point's IP Address. This IP Address should be unique in
your network. The default IP Address is 192.168.0.1.
Subnet Mask
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the Access
Point is fixed and the value is 255.255.255.0.
802.1d Spanning Tree If it is enabled, this router will use the spanning tree protocol to prevent from
network loop happened in the LAN ports.
DHCP Server
Enable or disable the DHCP Server.
Lease Time
The DHCP Server will temporarily assign IP addresses to LAN clients. In the
Lease Time setting you can specify the time period that the DHCP Server lends
an IP address to your LAN client. The DHCP Server will change your LAN client's
IP address when this time threshold period is reached.
IP Address Pool
Start IP/End IP
You can designate a particular IP address range for your DHCP server to issue IP
addresses to your LAN Clients. By default the IP range is from: Start IP
192.168.0.100 to End IP 192.168.0.200.
- 32 -
Advertisement
Table of Contents
