Security Setting Of Bridge Mode - Planet WMRT-414 User Manual

Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
MAC Address 1-4 If you want to bridge more than two wired Ethernet networks together with wireless
connection, you have to enter the MAC addresses of otherWMRT-414s that with
join the bridging work into the fields.
Set Security IF you want to enable security to protect your wireless connection. Please press
"Set Security" button and refer to section "6.5 Security setting for bridge mode" to
configure the detail settings.
After configuration complete, please click "Apply" button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press "Continue" for
configure other settings or "Apply" to restart WMRT-414 with new configuration.
6.5

Security setting of bridge mode

In "AP Bridge-Point to Point mode", ""AP Bridge-Point to Multi-Point mode" and "AP
Bridge-WDS mode", you can click "Set Security" to add encryption for the communication
between the bridged access points. This can protect your wireless network.
- 64 -