Table of Contents
Advertisement
5.1.2
Password Setup
This screen allows you to change the management password.
Parameters
Description
Current Password
Enter your current password for the remote management administrator to
login to your Broadband router.
New Password
Enter your new password.
Confirmed Password
Enter your new password again for verification purposes.
After the setup completed, please click "Apply" to save the settings. After press "Apply", you will see a
web screen to prompt you the configurations save successfully. You may refer to section 4.2.7 for the
information of this screen.
Note: If you forget the password, please reset the WMRT-414 to the factory default by press RESET
button (on WMRT-414's rear panel) over 10 seconds.
- 21 -
Advertisement
Table of Contents
