Planet VIP-050 User Manual page 62

atpm store [erase]
The atpm store command store all atpm tables into non-volatile memory.
Syntax description
(Optional) Erase the non-volatile before storing the dial plan data-
erase base. This option is not recommended except the very first time you
use the atpm store command.
Hunt Group Table Management Commands
atpm hadd hunt_group_id {1|2} dest_id [desi_id2] ...
Use the atpm hadd command to add an entry into the atpm hunt group table.
Syntax description
hunt_group_id
1
2
dest_id1
dest_id2
dest_id3 ...
Example
The following example shows how to group destination 1, 2, 3 and 4 into a hunt group, assign it
hunt group ID 10, and specify hunt type 2 for this hunt group.
ITG>atpm hadd 10 2 1 2 3 4<Enter>
atpm hdel hunt_group_id
The atpm hdel command deletes an entry from the atpm hunt group table.
Syntax description
hunt_group_id
atpm hfind hunt_group_id
The atpm hfind finds and display an entry in the hunt group table.
54
Hunt group ID. For each hunt group, you need to assign it a unique identifier
between 1 and 65536.
Hunt type 1. Hunt type 1 hunts destination within a hunt group starting from
the destination member just after the last used member.
Hunt type 2. Hunt type 2 hunts destination within a hunt group starting from
the first destination member.
ID of the first destination member in the hunt group.
(Optional)List of ID's of additional destination members in the hunt group.
ID of the hunt group to be deleted from the hunt group table.
VIP User's Manual
Command Line Interface