Voice Coding Profile Configuration Commands; Common Coding Profile Configuration Commands - Planet VIP-050 User Manual

6.10 Voice Coding Profile Configuration Commands

Coding profile is used to store coding parameters for voice and fax coding p that can be used by te-
lephony port on VIP. VIP has built-in coding profiles, each having a unique profile ID and parame-
ters for specific voice, fax or modem coder. Among these coding profiles, there are five may be
used for voice or fax applications. The following table summarizes coding profiles available for
voice and fax applications.
Coding profile ID
This session will introduce commands for setting the parameters for a particular coding profile. All
the commands in this session are of the same syntax as follows:
set coding profile_id option [option] . . .
Syntax for the profile_id is as follows:
profile_id

6.10.1 Common Coding Profile Configuration Commands

set coding profile_id coding_type coding_type
Syntax description
coding_type
Parameter
g711_mu
g723_53
g723_63
g729ab
fax_t38
Note: Modification will not take effect till save and next reboot.
48
0 G.723 6.3 kbps voice coder
1 G.729ab voice coder
2 G723 5.3 kbps voice coder
5 Proprietary fax coder
6
G.711 μ-law voice coder
10 Standard T.38 fax coder
ID of the coding profile to be modified.
Type of the codcc as defined in the following table.
Description
G.711 PCM u-law coding
G.723.1 5.3 kbps coding
G.723.1 6.3 kbps coding
G.729 annex A, annex B 8kbps coding
Fax Relay in T.38 mode
Coder
Command Line Interface
VIP User's Manual