Voice Coding Profile Configuration Commands - Planet VIP-050 User Manual

SIP Voice Gateway User's Manual
set coding profile_id cp_tone_detect
This command is used to specify a secondary level of control of call progress tone detection. If the
call progress detection control for a telephony port is set to "As per coding profile" (refer to com-
mand "set port port
not.
Syntax description
on Enable call progress tone detection.
off Disable call progress tone detection.
set coding profile_id fax_tone_detect
This command is used to specify a secondary level of control of V.21 fax tone detection. If the fax
tone detection control for a telephony port is set to "As per coding profile" (refer to command
port port fax_tone_det_ctrl"), this parameter determines if detection is to be enabled or not. For a
voice coder, fax tone detection has to be enabled, otherwise, telephony port never switches to fax
mode while the voice coder is active. For a fax profile it does not matter if the fax tone detection is
enabled or disabled.
Syntax description
Enable V.21 fax tone detection.
on
Disable V.21 fax tone detection.
off
set coding profile_id usage {voice | fax} {on | off}
Syntax description
The coding profile is allowed, if the parameter that follows is "on", for being used
as voice coder.
Voice
The coding profile is not allowed, if the parameter that follows is "off", for being
used as voice coder.
The coding profile is allowed, if the parameter that follows is "on", for being used
as fax coder.
Fax
The coding profile is not allowed, if the parameter that follows is "off", for being
used as fax coder.

6.10.2 Voice Coding Profile Configuration Commands

set coding profile_id adaptive_playout
VIP has built-in voice packet buffer, which allows VIP to remove packet jitter from the incoming
packet stream. VIP also implements an adaptive voice packet playback.This command is used to
enable/disable the adaptive playback function for a voice coding profile.
Syntax description
Command Line Interface
{on | off}
cp_tone_det_ctrl"), this parameter determines if detection is to be enabled or
{on | off}
{on | off}
"set
49