Hard Drive - HP OMEN Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part does not include the hard drive bracket (929561-001) or connector cable
(929450-001).
Description
2 TB, 5400 rpm, 7mm (for use only in a dual storage configuration with the 256 GB solid state drive)
2 TB, 5400 rpm + 8 GB NAND Hybrid, 7mm
1 TB, 7200 rpm, 9.5mm
Hard drive bracket kit
Hard drive connector cable
IMPORTANT:
and replacement
Before removing the hard drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Release the hard drive connector cable from the zero insertion force (ZIF) connector (1) on the system
board.
2. Remove the hard drive connector cable from the ZIF connector (2).
3. Lift the top edge of the hard drive upward (3).
Make special note of each screw and screw lock size and location during removal
Battery on page 33).
Component replacement procedures
Spare part number
929167-850
929167-850
766644-001
929561-001
929450-001
35