HP OMEN Maintenance And Service Manual page 78

Description
For use in Czech Republic and Slovakia
For use in France
For use in Germany
For use in Greece
For use in Hungary
For use in Israel
For use in Italy
For use in Japan
For use in Latin America
For use in Norway
For use in Portugal
For use in Romania
For use in Russia
For use in Saudi Arabia
For use in Slovenia
For use in South Korea
For use in Spain
For use in Switzerland
For use in Taiwan
For use in Thailand
For use in Turkey
For use in the United Kingdom and Singapore
For use in the United States
IMPORTANT:
and replacement
Before removing the display bezel, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hinge covers (see
b. System support brackets (see
68 Chapter 6 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
33), and then remove the following components:
48).
System support brackets on page
Spare part number
929478-FL1
929478-051
929478-041
929478-151
929478-211
929478-BB1
929478-061
929478-291
929478-161
929478-DH1
929478-131
929478-271
929478-251
929478-171
929478-BA1
929478-AD1
929478-071
929478-BG1
929478-AB1
929478-281
929478-141
929478-031
929478-001
49).