Siemens SIMATIC ET 200SP Manual page 13

Accessories
You order the following accessories separately:
● BA 2×RJ45 BusAdapter
● BA 2×FC BusAdapter
● BA 2×SCRJ BusAdapter
● BA SCRJ/RJ45 BusAdapter
● BA SCRJ/FC BusAdapter
● BA 2×LC BusAdapter
● BA LC/RJ45 BusAdapter
● BA LC/FC BusAdapter
● Labeling strips
● Reference identification label
A detailed list of the available accessories can be found in the system manual ET 200SP
distributed I/O system (http://support.automation.siemens.com/WW/view/en/58649293).
Server module
The server module is included in the scope of delivery of the interface module and is
available separately as a spare part. The server module has the following properties:
● Terminates the backplane bus of the ET 200SP distributed I/O system
● Features a support for 3 spare fuses (5 × 20 mm)
● Provides station functions, for example, group load diagnostics, status bytes.
● Identification data I&M 0 to 3
Note
You need to configure and assign parameters to the server module in the configuration
software.
To do this, place the server module in the last configuration slot and enable the parameter
Group diagnostics: Missing supply voltage L+. When there are 30 I/O modules, the server
module is inserted in slot 31.
You can find more information in the Server module
(http://support.automation.siemens.com/WW/view/en/63257531) manual.
IM 155-6 PN HS interface module (6ES7155-6AU00-0DN0)
Manual, 09/2016, A5E34928647-AA
Product overview
2.1 Properties
13