Siemens SIMATIC ET 200SP Manual page 12

Product overview
2.1 Properties
Properties
The module has the following properties:
● Connects the ET 200SP distributed I/O system with PROFINET IO
● High-speed applications as of 125 µs
● Isochronous mode according to PROFINET V2.3
● Supply voltage 1L+ 24 V DC (SELV/PELV).
● The connection plugs for the 24 V DC supply voltage and the server module are included
in the scope of delivery of the interface module.
● PROFINET IO connection via selectable BusAdapters
– For RJ45 bus connection plug (BA 2×RJ45)
– For direct connection of the bus cable (BA 2×FC)
– For POF/PCF fiber-optic cable (BA 2xSCRJ)
– As media converter for POF/PCF fiber-optic cable ⇔ standard RJ45 plug (BA
– As media converter for POF/PCF fiber-optic cable ⇔ direct connection of the bus
– For glass fiber-optic cable (BA 2xLC)
– As media converter for glass fiber-optic cable ⇔ standard RJ45 plug (BA LC/RJ45)
– As media converter for glass fiber-optic cable ⇔ direct connection of the bus cable (BA
The module supports the following PROFINET IO functions (see (Page 15))
Maximum configuration
● 30 I/O modules
● 0.5 m backplane bus (without interface module but with server module)
Maximum amount of I/O data
The maximum amount of I/O data without user data qualifier is 968 bytes.
Note
• In the case of a shared device configuration, the 968 bytes apply to the total I/O data of
all controllers that share the device.
• If more than two (max. four) controllers share the device, the maximum amount of I/O
data including user data qualifier is limited to 360 bytes per controller.
12
SCRJ/RJ45)
cable (BA SCRJ/FC)
LC/FC)
IM 155-6 PN HS interface module (6ES7155-6AU00-0DN0)
Manual, 09/2016, A5E34928647-AA