Processor Socket Assembly; Processor Function Overview; Figure 15. Processor Socket Assembly - Intel S1400SP Technical Manual

Intel® Server Board S1400SP TPS
Note: Previous generation Intel
described in this document.
®
Visit the Intel website for a complete list of supported processors.
3.1.1

Processor Socket Assembly

Each processor socket of the server board is pre-assembled with an Independent Latching
Mechanism (ILM) and Back Plate which allow for secure placement of the processor and
processor heat to the server board.
The illustration below identifies each sub-assembly component. (Note: The heat sink styles
may vary.)
3.2

Processor Function Overview

With the release of the Intel
v2 product families, several key system components, including the CPU, Integrated Memory
Controller (IMC), and Integrated IO Module (IIO), have been combined into a single processor
package and feature per socket; One Intel
of up to 8.0 GT/s, up to 24 lanes of Gen 3 PCI Express* links capable of 8.0 GT/s, and 4 lanes
of DMI2/PCI Express* Gen 2 interface with a peak transfer rate of 5.0 GT/s. The processor
supports up to 46 bits of physical address space and 48-bit of virtual address space.
Revision 2.1
® ®
Xeon processors are not supported on the Intel

Figure 15. Processor Socket Assembly

® ®
Xeon processor E5-2400 and the Intel
®
QuickPath Interconnect point-to-point links capable
Intel order number G64248-003
Functional Architecture
®
server board
® ®
Xeon processor E5-2400
15