Intel ® Local Control Panel Connector; On-Board Storage Connectors; Sata Connectors; Multiport Mini-Sas/Sata Connectors - Intel S1400SP Technical Manual

Intel® Server Board S1400SP TPS
8.3.3 Intel Local Control Panel Connector
®
The server board includes a 7-pin connector that is used when the system is configured with the
®
Intel Local Control Panel with LCD support. On the server board this connector is labeled
"LCP" and is located on the front edge of the board. The following table provides the pin-out for
this connector:
8.4

On-Board Storage Connectors

The server board provides connectors for support of several storage device options. This
section provides a functional overview and pin-out of each connector.
8.4.1

SATA Connectors

The server board includes two white ports SATA connectors capable of transfer rates of up to
6Gb/s. On the server board this connector is labeled as "SATA_0" and "SATA_1". The following
table provides the pin-out for these connectors:
8.4.2

Multiport Mini-SAS/SATA Connectors

The server board includes three 40-pin high density multiport mini-SAS/SATA connectors
labeled as "SCU_0", "SCU_1" and "SATA_2-5".
"SCU_0" and "SCU_1" connectors support up to four SATA or SAS ports each. By default, only
the connector labeled "SCU_0" is enabled and has support for up to four SATA ports capable of
Revision 2.1

Table 29. Front Panel USB Connector Pin-out

Signal Description
P5V_USB_FP
USB2_P11_F_DN
USB2_P11_F_DP
GROUND
®
Table 30. Intel Local Control Panel Connector Pin-out
Signal Description
SMB_SENSOR_3V3STBY_DATA_R0
GROUND
SMB_SENSOR_3V3STBY_CLK
P3V3_AUX
FM_LCP_ENTER_N_R
FM_LCP_LEFT_N_R
FM_LCP_RIGHT_N_R

Table 31. AHCI SATA Controller Connector Pin-out

Signal Description
GROUND
SATA_TXP
SATA_TXN
GROUND
SATA_RXN
SATA_RXP
GROUND
Intel order number G64248-003
Pin# Pin# Signal Description
1 2 P5V_USB_FP
3 4 USB2_P13_F_DN
5 6 USB2_P13_F_DP
7 8 GROUND
10 TP_USB2_FP_10
Pin#
1
2
3
4
5
6
7
Pin#
1
2
3
4
5
6
7
On-board Connector/Header Overview
85