Group - HP MSR Series Command Reference Manual

Table 3 Command output
Field
Idle TimeOut
Callback-number
Work Directory
ACL Number
VLAN ID
Password control configurations
Password aging
Password length
Password composition
Password complexity
Maximum login attempts
Action for exceeding login attempts

group

Use group to assign a local user to a user group.
Use undo group to restore the default.
Syntax
group group-name
undo group
Default
A local user belongs to the system-defined user group system.
Views
Local user view
Predefined user roles
network-admin
Description
Idle timeout period, in minutes.
Authorized PPP callback number.
Directory that FTP, SFTP, or SCP users in the group can access.
Authorization ACL.
Authorized VLAN.
Password control attributes that are configured for the user group.
This field appears only when password aging is enabled. The aging time
is displayed in parentheses.
This field appears only when password length control is enabled. The
minimum password length is displayed in parentheses.
This field appears only when password composition checking is
enabled. The field also displays the following information in
parentheses:
•
Minimum number of character types that the password must contain.
•
Minimum number of characters from each type in the password.
This field appears only when password complexity checking is enabled.
The field also displays the following information in parentheses:
•
Whether the password can contain the username or the reverse of the
username.
•
Whether the password can contain any character repeated
consecutively three or more times.
Maximum number of consecutive failed login attempts.
Action to take on the user who failed to log in after using up all login
attempts.
39