Display Connection-Limit Statistics - HP MSR Series Command Reference Manual

<Sysname> display connection-limit ipv6-stat-nodes interface vlan-interface 10 slot 2
count
Slot 2:
Current limit statistic nodes count is 1.
Table 69 Command output
Field
Src IP address
Dst IP address
VPN instance
Service
Sessions threshold
Hi/Lo
Sessions count
New session flag
Related commands
connection-limit apply global ipv6-policy
•
connection-limit apply ipv6-policy
•
connection-limit ipv6-policy
•
limit
•

display connection-limit statistics

Use display connection-limit statistics to display the connection limit statistics globally or on an interface.
Syntax
MSR1000/MSR2000/MSR3000:
display connection-limit statistics { global | interface interface-type interface-number }
MSR4000:
display connection-limit statistics { global | interface interface-type interface-number } [ slot
slot-number ]
Views
User view
Predefined user roles
network-admin
network-operator
Description
Source IPv6 address.
Destination IPv6 address.
MPLS L3VPN to which the IP address belongs. "---" indicates that IP address is on the
public network.
Protocol name and service port number. An unwell-known protocol is displayed as
"unknown(xx)," where "xx" indicates the protocol number. For the ICMP protocol,
"xx" indicates the hexadecimal number of the type and code field, which is
represented in decimal notation.
Upper connection limit/lower connection limit.
Number of current connections.
Whether or not new connections can be created:
•
Permit—New connections can be created.
•
Deny—New connections cannot be created.
495