State; Usage - HP MSR Series Command Reference Manual

[Sysname] pki domain 1
[Sysname-pki-domain-1] source ipv6 1::8
# Specify the IP address of the interface GigabitEthernet 1/0/1 as the source IPv4 address of PKI
protocol packets.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] source ip interface gigabitethernet 1/0/1
# Specify the IPv6 address of the interface GigabitEthernet 1/0/1 as the source IPv6 address of PKI
protocol packets.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] source ipv6 interface gigabitethernet 1/0/1

state

Use state to set the state or province name for a PKI entity.
Use undo state to remove the configuration.
Syntax
state state-name
undo state
Default
No state name or province name is set for a PKI entity.
Views
PKI entity view
Predefined user roles
network-admin
Parameters
state-name: Specifies a state name or a province name, a case-sensitive string of 1 to 63 characters. No
comma can be included.
Examples
# Set countryA as the state name of the PKI entity en.
<Sysname> system-view
[Sysname] pki entity en
[Sysname-pki-entity-en] state countryA

usage

Use usage to specify the extension for certificates.
Use undo usage to remove the configuration.
Syntax
usage { ike | ssl-client | ssl-server } *
295