Hwtacacs Scheme; Key (Hwtacacs Scheme View) - HP MSR Series Command Reference Manual

Examples
# Set the IP address for the device to use as the source address for HWTACACS packets to 129.10.10.1.
<Sysname> system-view
[Sysname] hwtacacs nas-ip 129.10.10.1
Related commands
nas-ip (HWTACACS scheme view)

hwtacacs scheme

Use hwtacacs scheme to create an HWTACACS scheme and enter HWTACACS scheme view.
Use undo hwtacacs scheme to delete an HWTACACS scheme.
Syntax
hwtacacs scheme hwtacacs-scheme-name
undo hwtacacs scheme hwtacacs-scheme-name
Default
No HWTACACS scheme exists.
Views
System view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme-name: Specifies the HWTACACS scheme name, a case-insensitive string of 1 to 32
characters.
Usage guidelines
An HWTACACS scheme can be referenced by more than one ISP domain at the same time.
You can configure up to 16 HWTACACS schemes.
Examples
# Create an HWTACACS scheme named hwt1 and enter HWTACACS scheme view.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1]
Related commands
display hwtacacs scheme

key (HWTACACS scheme view)

Use key to set the shared key for secure HWTACACS authentication, authorization, or accounting
communication.
Use undo key to remove the configuration.
82