Radius Dscp; Radius Nas-Ip - HP MSR Series Command Reference Manual

[Sysname] radius dynamic-author server
[Sysname-radius-da-server]
Related commands
client
•
port
•

radius dscp

Use radius dscp to change the DSCP priority of RADIUS packets.
Use undo radius dscp to restore the default.
Syntax
radius [ ipv6 ] dscp dscp-value
undo radius [ ipv6 ] dscp
Default
The DSCP priority of RADIUS packets is 0.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 RADIUS packets. If you do not specify this keyword, this command sets the DSCP
priority for the IPv4 RADIUS packets.
dscp-value: Specifies the DSCP priority of RADIUS packets, in the range of 0 to 63. A larger value
represents a higher priority.
Usage guidelines
Use this command to set the DSCP priority in the ToS field of RADIUS packets for changing their
transmission priority.
Examples
# Set the DSCP priority of IPv4 RADIUS packets to 10.
<Sysname> system-view
[Sysname] radius dscp 10

radius nas-ip

Use radius nas-ip to specify a source address for outgoing RADIUS packets.
Use undo radius nas-ip to delete a source address for outgoing RADIUS packets.
Syntax
radius nas-ip { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
undo radius nas-ip { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
61