Accounting Login - HP MSR Series Command Reference Manual

accounting login

Use accounting login to specify the accounting method for login users.
Use undo accounting login to restore the default.
Syntax
In non-FIPS mode:
accounting login { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ none ] | none | radius-scheme radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
undo accounting login
In FIPS mode:
accounting login { hwtacacs-scheme hwtacacs-scheme-name [ radius-scheme radius-scheme-name ]
[ local ] | local | radius-scheme radius-scheme-name [ hwtacacs-scheme hwtacacs-scheme-name ]
[ local ] }
undo accounting login
Default
The default accounting method of the ISP domain is used for login users.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local accounting.
none: Does not perform accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
Accounting is not supported for FTP, SFTP, and SCP users.
You can specify one primary accounting method and multiple backup accounting methods.
When the primary method is invalid, the device attempts to use the backup methods in sequence. For
example, the accounting login radius-scheme radius-scheme-name local none command specifies a
primary default RADIUS accounting method and two backup methods (local accounting and no
accounting). The device performs RADIUS accounting by default and performs local accounting when
the RADIUS server is invalid. The device does not perform accounting when both of the previous methods
are invalid.
Examples
# Configure ISP domain test to use local accounting for login users.
<Sysname> system-view
6