Pipe Stand Mounting (Floboss 103/Floboss 104); Orifice Plate Mounting (Floboss 103) - Emerson FloBoss 103 Instruction Manual

2.3.2
2.3.3
Revised August-2017

Pipe Stand Mounting (FloBoss 103/FloBoss 104)

To install the FloBoss 103/ FloBoss 104 on a 2-inch pipe stand:
1. Install the pipe stand per the directions included with the pipe stand.
2. Remove the orifice/meter run from service.
Install the FloBoss on the pipe stand using clamps or mounting
3.
brackets. Refer to Figure 2-4 (for FB103) and Figure 2-5 (for
FB104).

Orifice Plate Mounting (FloBoss 103)

To install the FloBoss 103 on an orifice plate:
1. Remove the orifice/meter run from service.
2. Install the FloBoss 103 on the meter run using a manifold and
hardware to secure the FloBoss 103 to the orifice flanges. Refer to
Figure 2-4.
Figure 2-4. FB103 Mounting Options
FloBoss 103/104 Instruction Manual
Installation and Use 2-7