D-Link DGS-510 Reference Manual page 704

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
supply voltage
bias current
TX power
RX power
high-low: High or low threshold.
Event description: when the any of SFP parameters exceeds from the alarm
threshold.
Log Message: Optical transceiver <interface-id> <component> <high-low>
alarm threshold exceeded
Parameters description:
interface-id: port interface ID.
component: DDM threshold type. It can be one of the following types:
temperature
supply voltage
bias current
TX power
RX power
high-low: High or low threshold.
Event description: when the any of SFP parameters recovers from the warning
threshold.
Log Message: Optical transceiver <interface-id> <component> back to normal
Parameters description:
interface-id: port interface ID.
component: DDM threshold type. It can be one of the following types:
temperature
supply voltage
bias current
TX power
RX power
DHCPv6 Client
Log Description
Event description: DHCPv6 client interface administrator state changed.
Log Message: DHCPv6 client on interface <ipif-name> changed state to
[enabled | disabled]
Parameters description:
<ipif-name>: Name of the DHCPv6 client interface.
Event description: DHCPv6 client obtains an ipv6 address from a DHCPv6
server.
Log Message: DHCPv6 client obtains an ipv6 address <ipv6address> on
interface <ipif-name>
Parameters description:
ipv6address: ipv6 address obtained from a DHCPv6 server.
ipif-name: Name of the DHCPv6 client interface.
Event description: The ipv6 address obtained from a DHCPv6 server starts
renewing.
Log Message: The IPv6 address <ipv6address> on interface <ipif-name> starts
renewing
Parameters description:
ipv6address: ipv6 address obtained from a DHCPv6 server.
701
Critical
Warning
Severity
Informational
Informational
Informational