D-Link DGS-510 Reference Manual page 504

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
KBPS
BURST-NORMAL
BURST-MAX
CIR
pir PIR
bc COMMITTED-BURST
be PEAK-BURST
conform-action
exceed-action
violation-action
ACTION
color-aware
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
An aggregate policer can be shared by different policy map classes in a policy map. It cannot be
shared by separate policy maps.
Example
This example shows how an aggregate policer named "agg-policer5" with a single rate two color
policer is configured. This named aggregator policer is applied as the service policy for the class 1
and class 2 traffic class in the policy 2 policy map.
names must start with an alphabetic character (not a digit) and must
be unique across all aggregate policers.
Specifies the average rate, in kilobits per second.
(Optional) Specifies the normal burst size in kilobytes.
(Optional) Specifies the maximum burst size, in kilobytes.
Specifies the committed information rate in Kbps. The committed
packet rate is the first token bucket for the two-rate metering.
Specifies the peak information rate in Kbps. The peak information
rate is the second token bucket for the two-rate metering.
Specifies the burst size for the first token bucket in kilobytes.
Specifies the burst size for the second token bucket in kilobytes.
(optional) Specifies the action to take on green color packets. If the
conform-action is not specified, the default action is transmit.
Specifies the action to take on packets that exceed the rate limit.
For two rate policer, if the exceed-action is not specified, the
default action is drop.
(Optional) Specifies the action to take on packets that violate the
normal and maximum burst sizes for singe rate policing. Specifies
the action to take for those packets that did not conform to both CIR
and PIR. For a single rate policer, If violation-action is not
specified, it will create a single rate two color policer. For a two rate
policer, if the violation-action is not specified, the default action is
equal to the exceed-action.
Specifies the action to take on packets. Specify one of the following
keywords:
drop - Drops the packet.
set-dscp-transmit VALUE - Sets the IP differentiated services
code point (DSCP) value and transmits the packet with the new IP
DSCP value.
set-1p-transmit - Sets the 802.1p value and transmits the packet
with the new value.
transmit - Transmits the packet unaltered.
(Optional) Specifies the option for the single rate three colors policer
or two rates three colors policer. When color-aware is not specified,
the policer works in the color blind mode. When color-aware is
specified, the policer works in color aware mode.
501