D-Link DGS-510 Reference Manual page 628

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The command is available for physical port and port-channel interface configuration.
The command takes effect for access ports or hybrid ports.
Use this command to enable the surveillance VLAN function for ports.
Both the surveillance vlan command in Global Configuration Mode and the surveillance vlan
enable command in Interface Configuration Mode need to be enabled for a port to start the
surveillance VLAN function.
When surveillance VLAN is enabled for a port, the port will be automatically learned as surveillance
VLAN untagged member, the received untagged surveillance packets will be forwarded to
surveillance VLAN. The received packets are determined as surveillance packets if the source MAC
addresses of packets comply with the OUI addresses configured by the surveillance vlan mac-
address command.
Example
This example shows how to enable surveillance VLAN function on physical port eth1/0/1.
Switch# configure terminal
Switch(config)#interface eth1/0/1
Switch(config-if)#surveillance vlan enable
Switch(config-if)#
68-4 surveillance vlan mac-address
This command is used to add the user-defined surveillance device OUI. Use the no form of this
command to delete the user-defined surveillance device OUI.
surveillance vlan mac-address MAC-ADDRESS MASK [component-type {vms | vms-client |
video-encoder | network-storage | other} description TEXT]
no surveillance vlan mac-address MAC-ADDRESS MASK
Parameters
MAC-ADDRESS
MASK
component-type
vms
vms-client
video-encoder
Specifies the OUI MAC address.
Specifies the OUI MAC address matching bitmask.
(Optional) Specifies surveillance components that could be auto-
detected by surveillance VLAN.
(Optional) Specifies the surveillance components type as Video
Management Server (VMS).
(Optional) Specifies the surveillance components type as VMS
client.
(Optional) Specifies the surveillance components type as Video
625