Transportation Use Case 2 - Cisco IR829 Hardware Installation Manual

Product Overview
Supported Cisco Antennas and Cables

Transportation Use Case 2

Antenna Arrangement
7 x RF ports, with the IR829 deployed in a transportation application.
(Alternate Configuration, can be used in case the application calls for the WiFi antennas to be separate from the LTE antenna for example.
a ceiling mount WLAN).
This case describes a Tercia 3-in-1 transportation antenna (which covers MIMO cellular and GPS) together with qty 2 x 2-in-1 WiFi
antennas.
NOTE: A custom ceiling mount bracket is required for the 2-in-1 antenna if installed in a ceiling mount configuration (NOT
SUPPLIED BY CISCO)
Extension Cable
No extension cables are required if the IR829 is located within ~1.0ft of 5-in-1 antenna, and ~2.0ft of WiFi 2-in-1 antenna.
If these conditions are not met, this deployment requires the following extension cables:
Cellular extension cables (2 ports)
Qty 2X LMR-400-DB TNC(m)-R/A - TNC(f), 5ft
 4G-CAB-LMR400-5
— OR
Qty 2X LMR-400-DB TNC(m)-R/A - TNC(f), 10ft
 G-CAB-LMR400-10
— OR
Qty 2X LMR-400-LLPL plenum / indoor only TNC(m)-R/A - TNC(f), 20ft
 4G-CAB-ULL-20
WiFi 2.4 GHz / 5GHz extension cables (4 ports, can mix and match lengths per installation requirements if needed) Qty 4x LMR-400-DB
RPTNC(plug) - STR RPTNC(jack) - STR, 5ft
 AIR-CAB005LL-R
— OR
Qty 4x LMR-400-DB RPTNC(plug)-R/A RPTNC(jack)-STR, 10ft

CAB-L400-10-R
— AND
GPS port - No extension cable required, 3-in-1 antenna comes with integrated active GPS antenna with 17ft cable.
Antenna
Quinta 5 element 5-in-1 transportation antenna, black radome color, 2x 4G cellular, 2x dual band WiFi, 1xGPS
 ANT-5-4G2WL2G1-O
Has the following integrated cables:
33