Power Supply; Sfp Modules - Cisco IR829 Hardware Installation Manual

Product Overview

Power Supply

 qty 2 x cellular, LMR-195, 2ft long, TNC(m)
 qty 2 x WiFi, 2ft long, LMR-195 RPTNC (plug)
 qty 1 x GPS, RG-174, 17ft long, SMA(m)
— AND
WiFi 2-in-1 2 element 2 in 1 transportation antenna, black radome color, 2x dual band WiFi
 ANT-2-WLAN-D-O
Has the following integrated cables:
 qty 2 x WiFi, 3ft long, LMR-240 RPTNC (plug)
Power Supply
The Cisco IR829 comes with an external power connector.
 Direct-wire 12/24VDC vehicle charging system input (9 — 32VDC).
 4-pin locking Molex power connector, Cisco part number 29-2562-01.
There is an external AC to DC power adapter for the IR829. It meets ITE standards and operating temperature range of -20C to 60C, but is
not suited for industrial environment. Part Number is IR829-PWR125W-AC.
There is a 12.5 feet power cable available to order. Part Number is IR829-DC-PWRCORD.

SFP Modules

The router Ethernet SFP modules provide connections to other devices. These field-replaceable transceiver modules provide the uplink
interfaces. Local connectors (LCs) provide the fiber-optic connection. RJ-45 connectors allow copper connections. You can use any
combination of the supported SFP modules listed in the table that follows.
34