Cisco IR829 Hardware Installation Manual page 18

Product Overview
General Description
Table 1 LED Descriptions
LED
PWR
POE
VPN
GE0 WAN
GPS
MOD
Ethernet LAN
Switch Ports
GE1-GE4]
Single LED per
Port
Activity Description
Power Status Off — No power
Green Steady on — Normal operation
Green Flashing — Boot up phase or in ROM Monitor mode
Amber Steady on — System shutdown due to under or over voltage
conditions
Amber Flashing — System has an error, but has network
connectivity
POE Power Supply Status Off — No -54V PoE power supply detected or no PoE board
installed
Green Steady on — 54V POE power supply good and all powered
port operating normally
Amber Steady on — 54V POE power supply good, but one or more
POE ports has a fault.
VPN Off — No VPN tunnel
Steady on — At least one VPN tunnel is up
Link Status Off — No link
Steady on — Link is up
Flashing — Transmitting and Receiving data
GPS Status Off — GPS not configured
On — GPS configured
Slow Flash — GPS Acquiring in Standalone GPS
Fast Flash — GPS Acquiring in Assisted GPS
Slow Flash is defined as the LED will be on for 0.25 seconds and
off for 0.75 seconds.
Fast Flash s defined as the LED will be on for 0.25 seconds and off
for 0.25 seconds.
Link Status/POE Status Off — No link
Green Steady on — Link is up
Green Flash — Transmitting and Receiving data
Amber — POE Fault, implies no link
16