Supported Dual Band Cisco Wifi Antenna Use Case 3; In 1 Antenna Configuration For Transportation; Transportation Use Case 1 - Cisco IR829 Hardware Installation Manual

Product Overview
Supported Cisco Antennas and Cables
Table 17 Dual Band Cisco WiFi Antenna Use Case 2
Item Description
Internal Cable N/A
External Cable N/A
Antenna 1x Dual Band, Dual Element per Band, Omni, 18" LONG RG-58 cables with RP-TNC (plug), 2.0dBi @ 2.4 GHz (2
ports), 3.0dBi @ 5 GHz (2 ports)


Supported Dual Band Cisco WiFi Antenna Use Case 3

Table 18 Dual Band Cisco WiFi Antenna Use Case 3
Item Description
Antenna Arrangement Dual Band Front Panel Mounted Antennas
Radio Module Dual Band Simultaneous 802.11n 2x2 MIMO WiFi
Connectors:
2x RP-TNC (jack)
Adapter and/or N(f) to N(f), RF-adapter, qty 2
Lightning Arrestor

Internal Cable N/A
External Cable RP-TNC(plug) to N(m)-R/A, LMR-240-DB, 5', qty 2

Antenna 2x Dual Band, Swivel Mount Omni, RP-TNC(plug), 2dBi @ 2.4 GHz, 4dBi @ 5 GHz


7 in 1 Antenna Configuration for Transportation

Transportation Use Case 1

Antenna Arrangement
7 x RF ports, with the IR829 deployed in a transportation application.
(Default Configuration)
Quinta 5-in-1 antenna AND a WiFi 2-in-1 antenna to utilize all 7 ports.
The 5-in1 Quinta antenna and the 2-in1 WiFi antennas need to be separated 18" between mounting hole centers of the two antennas.
Extension Cable
No extension cables are required if the IR829 is located within ~1.0ft of 5-in-1 antenna, and ~2.0ft of WiFi 2-in-1 antenna.
If these conditions are not met, this deployment requires the following extension cables:
Cellular extension cables (2 ports)
AIR-ANT2451V-R
AIR-ACC370-NF-NF
AIR-CAB005LL-R-N
AIR-ANT2524DB-R
31