Hints On Installation; Avoiding Condensation Problems - Pioneer X-MT2000 Operating Instructions Manual

Stereo cd receiver system
Hide thumbs Also See for X-MT2000:
Table of Contents

Advertisement

Available languages

Available languages

Caution!
Incorrect use of batteries can result in hazards such as leakage and bursting. Please
observe the following:
• Don't mix new and old batteriy together.
• Don't use different kinds of battery together— although they may look similar,
different batteries may have different voltages.
• Make sure that the plus and minus ends of each battery match the indications in the
battery compartment.
• Remove batteries from equipment that isn't going to be used for a month or more.

Hints on installation

We want you to enjoy using this unit for years to come, so please bear in mind the
following points when choosing a suitable location for it:
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such as a table, shelf or stereo
rack.
Don't...
Use in a place exposed to high temperatures or humidity, including
near radiators and other heat-generating appliances.
Place on a window sill or other place where the player will be
exposed to direct sunlight.
Use in an excessively dusty or damp environment.
Place directly on top of an amplifier, or other component in your
stereo system that becomes hot in use.
Use near a television or monitor as you may experience
interference—especially if the television uses an indoor antenna.
Use in a kitchen or other room where the player may be exposed
to smoke or steam.
Use on a thick rug or carpet, or cover with cloth—this may prevent
proper cooling of the unit.
Place on an unstable surface, or one that is not large enough to
support all four of the unit's feet.

Avoiding condensation problems

Condensation may form inside the player if it is brought into a warm room from outside,
or if the temperature of the room rises quickly. Although the condensation won't damage
the player, it may temporarily impair its performance. For this reason you should leave it
to adjust to the warmer temperature for about an hour before switching on and using.
1 Before You Start
7
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents