Waking Up To The Radio Or Auxiliary Component; Activating/Deactivating The Timer; Setting The Wake Up Time - Pioneer X-MT2000 Operating Instructions Manual

6 Using the Tuner
STANDBY
1
2
STANDBY/ON
BASS/TREBLE
3
CD SELECT
FUNCTION
DISPLAY/
CLOCK
TIMER
ENTER (DEMO)
TIMER
POWER
TIMER
FM/AM
AUX TUNER
4
ENTER
+
—
REMOTE CONTROL UNIT
26
En
Waking up to the radio or auxiliary
component
TUNING
) ! ⁄
$ ›
&
)
You can use the timer as an alarm clock to wake up to the radio or component connected
#*
)
to the auxiliary inputs, such as a satellite tuner. Once the timer is active, it will operate
OPEN/CLOSE
everyday at the set time.
Note: If there is a power failure or the system is unplugged from the wall outlet, the
display shows AM 12:00 once power is restored until you reset the clock. You can't use the
timer until you set the clock.
VOLUME

Activating/deactivating the timer

The timer has to be active before it will have any effect.
1 Press and hold TIMER for about a second.
If the timer is currently inactive, then
to activate the timer. If the timer is currently active,
to deactivate it.
2 Press ENTER to set.
• You can check whether the timer is currently active at any time by pressing
SNOOZE
The display shows

Setting the wake up time

¢
Unlike an ordinary alarm clock, you need to set a system switch off time as well as a
switch on time.
1 Switch to tuner and tune to the station you want to wake up to.
If you're using an auxiliary component, switch to
playback.
2 Set the volume.
Remember, things sound louder first thing in the morning!
3 Press and hold TIMER until the display shows TIMER? (about 3
seconds), then press ENTER.
4 Set the switch on time.
Use 4 and ¢ to set the hour then press
pressing
5 Set the switch off time.
Set in the same way as the switch on time.
6 Check the settings you just made.
The display should indicate that you set the wake up timer, then show the on time, the off
time, the function (
There isn't any way to edit these settings, so if you need to change something, simply set
the timer again.
TMR ON
or
TMR ON TMR OFF
to finish.
ENTER
or ), and the volume.
TUNER AUX
appears in the display, prompting you
?
appears, prompting you
?
TMR OFF
.
, then set up the component for
AUX
. Set the minute in the same way,
ENTER
.
TIMER