Sleeping To The Radio - Pioneer X-MT2000 Operating Instructions Manual

7
SLEEP
1
2
REMOTE CONTROL UNIT
Switch the system into standby.
The timer will not work if the system is left on! If the clock display is set to on, the wake
up timer indicator ( ) lights to show that the timer is now set.
• This system has a snooze feature so that after the radio has started playing you can
switch it off for five minutes for a little more sleep. Use the
only) to do this.

Sleeping to the radio

The sleep timer switches the system into standby after a specified amount of time so that
you can fall asleep without worrying about the stereo being left on all night. If you've also
set the wake up timer this is important since the wake up timer will only work if the
system is in standby.
Note: The clock must be set to be able to use the sleep timer.
Press SLEEP twice.
Press SLEEP repeatedly to set the time until the system goes into
standby.
There are four settings:
• (mins)
120
SLEEP
• (mins)
90
SLEEP
• (mins)
60
SLEEP
• (mins)
30
SLEEP
• (cancels the sleep timer)
SLEEP OFF
The sleep timer indicator ( ) lights when the sleep timer is active.
• Once the sleep timer is set, you can check the time left by pressing
careful not to press it three times: the sleep timer will be reset.
6 Using the Tuner
button (remote
SNOOZE
twice. Be
SLEEP
27
En