Playing Cds - Pioneer X-MT2000 Operating Instructions Manual

4 Getting Started
STANDBY
1
2
STANDBY/ON
BASS/TREBLE
3
CD SELECT OPEN/CLOSE
6
4
7
1 2 3
4 5 6
7 8 9
10/0 >10
+
BASS
—
REMOTE CONTROL UNIT
16
En

Playing CDs

The 3-disc changer lets you play up to three CDs back-to-back (or at random, or in your
TUNING
) ! ⁄
own programmed order), and you can even change discs while another one is still
$ ›
&
)
playing.
#*
)
The basic features are explained here; more features are covered in chapter 5 starting on
page 19.
Press 0 for disc 1 on the top panel to open disc tray 1.
1
The unit automatically switches on when you press any of the 0 (
buttons.
2 Load a CD.
Make sure that the label is face-up and that the CD is seated properly in the disc guide.
¢
• Don't use an adaptor with 8cm CD singles as it may damage the player.
CD 1
• Don't load more than one disc at a time in a disc guide.
Press 0 for disc 1 to close disc tray 1.
3
4 Press CD SELECT 1 (top panel) or CD1 (remote) to start playing
disc 1.
The current disc indicator shows which disc is selected.
You can use the
TRE
automatically switch on the system from standby and start playing a CD if there's one
loaded.
5 Adjust the volume and tone to your liking.
Use the volume control on the front panel, or the
on the remote to adjust the volume.
To adjust the tone, first press
buttons to adjust. (On the top panel, press
then use the 1 / 4 and ¡ / ¢ buttons to adjust.)
6 To skip to a different track:
• Press 4 once to skip to the start of the current track. Further presses skip to
previous tracks.
• Press ¢ to skip to the next track. Further presses take you to subsequent tracks.
• Use the number buttons (remote only) to jump straight to that track number. For
track 10 use the 10/0 button; for tracks 11 and over, use the >10 button. For
example, press >10, 6 for track 16; or >10, >10, 4 for track 24.
7 For fast scanning:
• Press and hold 4 (remote) or 1 / 4 (top panel) for fast reverse scanning.
Release to resume normal playback.
• Press and hold ¢ (remote) or ¡ / ¢ (top panel) for fast forward scanning.
Release to resume normal playback.
To pause playback, press 6.
8
Press again to restart playback.
To stop playback, press 7.
9
buttons ( ,
1
CD SELECT CD CD
on the remote, then use the 4 and ¢
or
BASS TRE
BASS
/
OPEN CLOSE
and on the remote) to
2 3
CD
+ and – buttons
VOLUME VOLUME
/ to select either bass or treble,
TREBLE
)