Sleeping To A Cd - Pioneer X-MT2000 Operating Instructions Manual

5 Using the CD Player
SLEEP
REMOTE CONTROL UNIT
24
En

Sleeping to a CD

The sleep timer switches the system into standby after a specified amount of time so that
you can fall asleep without worrying about the stereo being left on all night. If you've also
set the wake up timer this is important since the wake up timer will only work if the
system is in standby.
Note: The clock must be set to be able to use the sleep timer.
1 Press SLEEP twice.
2 Press SLEEP repeatedly to set the time until the system goes into
standby.
There are five settings:
• (after the CD has played out)*
SLEEP AUTO
• (mins)
120
SLEEP
• (mins)
90
SLEEP
• (mins)
60
SLEEP
• (mins)
30
SLEEP
• (cancels the sleep timer)
SLEEP OFF
The sleep timer indicator (
* not available if you're playing a CD in repeat mode.
• Once the sleep timer is set, you can check the time left by pressing
careful not to press it three times: the sleep timer will be reset.
• If you switch to the radio or auxiliary source when
will automatically go into standby a minute later.
) lights when the sleep timer is active.
SLEEP AUTO
twice. Be
SLEEP
is set, the system