Remote Control; Remote Control Range - Pioneer X-MT2000 Operating Instructions Manual

3 Controls and Displays
1
POWER
DIMMER TIMER SLEEP
FM/AM
CD AUX TUNER
–
7 10
6
4
ENTER
7
1 2 3
4 5 6
–
15 16
7 8 9
10/0 >10 C
RANDOM
19
+
BASS PLAY MODE
—
REMOTE CONTROL UNIT
7 m / 23 ft.
30
14
En

Remote control

1 POWER – Press to switch the unit on or into standby.
DISPLAY
2
/CLOCK
2 DISPLAY/CLOCK – Press to change the information shown in the display.
–
3 6
SNOOZE
3 DIMMER – Use to change the brightness of the display.
MONO
–
1 1 14
4 TIMER – Press to set the wake up timer.
¢
5 SLEEP – Press to set the sleep timer.
6 SNOOZE – Press for snooze function when using the wake up timer.
CD 1
7 CD – Press for CD mode. Also switches the system on if it was in standby.
CD 2
17
CD 3
8 AUX – Press for auxiliary mode. Also switches the system on if it was in standby.
PGM
18
9 FM/AM TUNER – Press for tuner mode, and to switch between AM and FM. Also
REPEAT
20
switches the system on if it was in standby.
–
21 23
10 MONO – Press to hear a stereo FM broadcast in mono (improves the sound quality).
1 1 6 – Press to start or restart playback, or pause a disc that's already playing.
TRE
12 4 and ¢ – When listening to CDs, press to skip back/forward tracks; press and
hold for fast reverse/forward play. When listening to the radio, use for turning and use to
tune into stations and select preset stations.
13 ENTER – Use to save a radio station preset; set the clock or timer.
14 7 – Press to stop playback. Also cancels auto scan tuning.
15 Number buttons – When playing CDs, use to select track numbers. When listening
to the radio, use to select preset stations.
16 C – Press to clear a CD playlist.
17 CD buttons – Press to select discs. Also switches the system on if it was in standby.
18 PGM – Press to start programming a CD playlist.
19 RANDOM – Press to start random CD playback.
20 REPEAT – Use to select the repeat mode (1-track, current disc or all-disc).
21 VOLUME +/– – Use to adjust the volume.
22 BASS / TRE – Use to adjust the tone (bass and treble) of the sound.
23 PLAY MODE – Use to select single disc play, or all-disc play.

Remote control range

Keep in mind the following when using the remote control:
30
• Make sure that there are no obstacles between the remote and the remote sensor on
the unit.
• Use within the operating range and angle, as shown left.
• Remote operation may become unreliable if strong sunlight or fluorescent light is
shining on the unit's remote sensor.
• Remote controllers for different devices can interfere with each other. Avoid using
remotes for other equipment located close to this unit.
• Replace the batteries when you notice a fall off in the operating range of the remote.